Extra Safety Steps

VPN USAGE

USE A VPN FOR ONE WEEK ON EAC/BE [ REQUIRED ]. WORKING ONES:

WINDSCRIBE - 0 Packet loss.

PIA (PRIVATE INTERNET ACCESS) - Most locations.

MullvadVPN/ Residential IPs - Known to work on Rust.

You can also use Mobile Data 4G/5G for valorant (connect from phone), this is for optimal results

Why do i need to use a VPN?

Using a VPN is essential for THE SPOOFER to ensure you don't risk a network flag. It's crucial to make sure everything works smoothly for you. Just use a VPN for one week, and after that, you can safely turn it off without worrying.

MONITER SPOOF:

Spoof Monitor Serials: https://streamable.com/be36b9

[+] Do it for all games, it is very crucial for ones such as APEX.

PERIPHERALS SPOOFING:

[+] Download: https://mega.nz/file/1L0BXBLb#8OjAkDvw_GML9aDnKLynceE-Ga_x3XMV9V3qp1onhrk [+] Follow the guide: https://streamable.com/p1j24a

FOR ASUS ONLY

  1. Follow this Video first: https://streamable.com/k653am

  2. Download EFI Loader: https://shorturl.at/Re3nr (same License key)

  3. Select USB in EFI Loader, and run it! No Files will be shown inside ur USB. That's fine!

  4. Open Powershell as admin and write [guid]::newGUid()and see the results.

  5. Make a picture of the GUID with your phone, we might need it later on (not always).

  6. Boot into BIOS like u did before with TPM and BIOS Configurations. (Restart + SHIFT) Go to Boot > Secure Boot > OS Type [Windows] & Secure Boot mode [Custom] Secure boot mode can be found under "Boot configuration" (Don't have it? That's fine!)

  7. Ensure all Default keys are installed. If it shows "0" at all, click "Install Default Keys".

  1. Now open 'KEK Management'

- Choose "Append key" option.

- Press "No" to load it from a file on external media.

- Choose USB file system. - Choose the "vgk.der" file.

- Select file format as "Public Key Certificate".

- Enter the GUID (with hyphens) that you saved earlier then press enter. NOT ALWAYS!

- Finally, press "Yes" to append KEK with content from the .der file.

YOU SHOULD NOW SEE A 'SUCCESS' MESSAGE IF YOU DONE EVERYTHING CORRECTLY!

  1. Do the same for 'DB Management' as u did for KEK Management.

  2. Now set your USB as Boot priority #1 and Windows Boot Manager as #2.

  3. Click save and exit bios again, we are done now. You will boot EFI spoofed.

ONCE ON WINDOWS, DO THIS LAST VERY IMPORTANT STEP!

Download the 'cleanup.exe' file, and run it as admin (CMD will pop up for one second, that's it.)

PreviousHP SPOOFINGNextHVCI/TPM/SB

Last updated